Mamba ADAT Digital Snake
The Mamba ADAT Digital Snake is an extension of
award winning Mamba digital snake
with ADAT digital interface. You can use this
as a simple point to point system to transport up
to 64 x 64 channels @ 48K over a single
CAT-5/6 or Fiber. Can also be connected to a
standard Analog Mamba system to mix and match
depending on your application. For example, you
can combine an analog stage box with ADAT near
your digital mixer at the FoH. Clock sync is
supported with EXT WC input and EXT WC
outputs. Mamba ADAT digital snake comes with
the same key features supported in our original
Mamba such as cable (fail over) redundancy,
compatibility with standard Ethernet switches, GbE
VLAN, Fiber etc. The Mamba ADAT is a compact
1U rack mount and fits all your 64 x 64 digital
audio needs using a single CAT-5/6 cable or Fiber.
Mamba ADAT Key Features
  • 64x64 channels over a single CAT-5 or Fiber
  • Available in 32x32 and 64x64 models
  • End-2-end latency less than 300 microsec
  • ADAT light pipe connector for ADAT in and out
  • Use standard light pipe cable to your ADAT in or outs
  • All features of award winning Mamba digital snake
  • Main and redundant CAT-5s
  • Works over Fiber using off-the-shelf Media Converters
  • Mix & Match Mamba Analog, AES or ADAT units
  • Point to point or Split (as many drops as you need)
  • Analog I/O on stage and ADATat the FoH or vice versa
  • EXT WC in on BNC (48K only)
  • EXT WC out on BNC (48K only)
  • EXt clk or Int clk select
  • Current version @ 48K (96K TBD)
  • 1U rack mount box (19"X12"X1.75") @ 9 pounds
  • Solid steel and sleek finish
For availability or help with your system setup, call us @ 408 434 9393 or
email to sales@networksound.com
Mamba ADAT Configuration
Point to point system include Stage and FoH units. Split system include Stage, FoH and Mon Mix units.
The above price include all ADAT cables (10 ft max).
International customers: Shipping charges would be separate based on your location. You are responsible for any
duty and clearance charges. We can ship via USPS for low cost also.

If you need more information or would like to discuss your specific configuration, please email to
sales@networksound.com or call us @ 408 434 9393. We would be glad to explain how a Mamba
system would fit to your application.

Let us know if you have any comments or feedback on this or other products. Your feedback is important
and would really be appreciated.
Copyright © 2003-2009 NetworkSound, Inc | Terms of Use & Privacy Policy
eXTReMe Tracker


Click on above images for a larger view
Product Specification
ADAT Light pipe connectors:
Industry standard ADAT connectors
Sturdy and mounted solid on PCB
Secured by pass thru chassis screw

Word Clock IN on BNC
Standard BNC connector (female)
Word Clock input to Mamba ADAT box
Connect WC out from your equipment (Master)
Accepts only 48KHz (current version)
Clock signal should be max 5V or 3.3VDC TTL levels

Word Clock OUT on BNC
Standard BNC connector (female)
Word Clock output from Mamba ADAT box
8 WC out to 8 of your boxes (8 ADAT sources)
Connect WC IN to your equipment (for Slave)
WC is 48KHz (current version)
Clock signal is 3.3VDC TTL level

Mamba Features
Other Mamba features such as fail over CAT5, RS232, Split etc are same

Mix Analog and Mamba ADAT or AES units
You need to be careful about WC setting (Ext WC select switch on back) on
AES or ADAT (digital Mamba boxes) side only. Analog Mamba units will
automatically set the clock to sync of other units.
ADAT In and Outs
- Cp\ompliant to Wavefront Semi ADAT
- Uses ADAT chips from WFS

WC Select Switch
Allows you to select External WC or Int WC
EXT WC position will set the ADAT Mamba box in slave mode
The AES Mamba box will sync to WC input (48K)
Make sure the WC IN is connected and your equipment provides a
WC to AES Mamba box
Only One of the ADAT boxes should be set to EXT WC
All other ADAT or AES Mamba boxes should be Int WC
If you select INT WC then ADAT Mamba box will be Master and you
need to connect EXT WC out BNC to your equipment EXT WC IN
(your equipment is Slave)

48K/96K selelct Switch
Default setting is 48K.
96K operation for future version TBD

Warranty:
Two year Limited warranty (WARRANTY INFO)

Rack mountable Chassis:
1U  (19" [L] X 12" [D] X 1.75" [H]) for 32x32 model
2U  (19" [L] X 12" [D] X 3.5" [H]) for 64x64 model
Solid steel and professional finish
Weight: 9 or 12 pounds
Point to Point

32ADTP2P: 32x32 - $1.999
64ADTP2P: 64x64 - $3,499
Split

32ADTSPL: 32x16x16 - $3,449
64ADTSPL: 64x32x32 - $5,999